M7350/kernel/arch/arm/plat-mxc/devices/platform-ahci-imx.c

157 lines
3.8 KiB
C
Raw Normal View History

2024-09-09 08:52:07 +00:00
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
#include <mach/devices-common.h>
#define imx_ahci_imx_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _SATA_BASE_ADDR, \
.irq = soc ## _INT_SATA, \
}
#ifdef CONFIG_SOC_IMX53
const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
#endif
enum {
HOST_CAP = 0x00,
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
HOST_PORTS_IMPL = 0x0c,
HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
};
static struct clk *sata_clk, *sata_ref_clk;
/* AHCI module Initialization, if return 0, initialization is successful. */
static int imx_sata_init(struct device *dev, void __iomem *addr)
{
u32 tmpdata;
int ret = 0;
struct clk *clk;
sata_clk = clk_get(dev, "ahci");
if (IS_ERR(sata_clk)) {
dev_err(dev, "no sata clock.\n");
return PTR_ERR(sata_clk);
}
ret = clk_prepare_enable(sata_clk);
if (ret) {
dev_err(dev, "can't prepare/enable sata clock.\n");
goto put_sata_clk;
}
/* Get the AHCI SATA PHY CLK */
sata_ref_clk = clk_get(dev, "ahci_phy");
if (IS_ERR(sata_ref_clk)) {
dev_err(dev, "no sata ref clock.\n");
ret = PTR_ERR(sata_ref_clk);
goto release_sata_clk;
}
ret = clk_prepare_enable(sata_ref_clk);
if (ret) {
dev_err(dev, "can't prepare/enable sata ref clock.\n");
goto put_sata_ref_clk;
}
/* Get the AHB clock rate, and configure the TIMER1MS reg later */
clk = clk_get(dev, "ahci_dma");
if (IS_ERR(clk)) {
dev_err(dev, "no dma clock.\n");
ret = PTR_ERR(clk);
goto release_sata_ref_clk;
}
tmpdata = clk_get_rate(clk) / 1000;
clk_put(clk);
writel(tmpdata, addr + HOST_TIMER1MS);
tmpdata = readl(addr + HOST_CAP);
if (!(tmpdata & HOST_CAP_SSS)) {
tmpdata |= HOST_CAP_SSS;
writel(tmpdata, addr + HOST_CAP);
}
if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
addr + HOST_PORTS_IMPL);
return 0;
release_sata_ref_clk:
clk_disable_unprepare(sata_ref_clk);
put_sata_ref_clk:
clk_put(sata_ref_clk);
release_sata_clk:
clk_disable_unprepare(sata_clk);
put_sata_clk:
clk_put(sata_clk);
return ret;
}
static void imx_sata_exit(struct device *dev)
{
clk_disable_unprepare(sata_ref_clk);
clk_put(sata_ref_clk);
clk_disable_unprepare(sata_clk);
clk_put(sata_clk);
}
struct platform_device *__init imx_add_ahci_imx(
const struct imx_ahci_imx_data *data,
const struct ahci_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
struct platform_device *__init imx53_add_ahci_imx(void)
{
struct ahci_platform_data pdata = {
.init = imx_sata_init,
.exit = imx_sata_exit,
};
return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
}