61 lines
1.8 KiB
Plaintext
61 lines
1.8 KiB
Plaintext
|
GPIO controllers on MPC8xxx SoCs
|
||
|
|
|
||
|
|
This is for the non-QE/CPM/GUTs GPIO controllers as found on
|
||
|
|
8349, 8572, 8610 and compatible.
|
||
|
|
|
||
|
|
Every GPIO controller node must have #gpio-cells property defined,
|
||
|
|
this information will be used to translate gpio-specifiers.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
|
||
|
|
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
|
||
|
|
- #gpio-cells : Should be two. The first cell is the pin number and the
|
||
|
|
second cell is used to specify optional parameters (currently unused).
|
||
|
|
- interrupts : Interrupt mapping for GPIO IRQ.
|
||
|
|
- interrupt-parent : Phandle for the interrupt controller that
|
||
|
|
services interrupts for this device.
|
||
|
|
- gpio-controller : Marks the port as GPIO controller.
|
||
|
|
|
||
|
|
Example of gpio-controller nodes for a MPC8347 SoC:
|
||
|
|
|
||
|
|
gpio1: gpio-controller@c00 {
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
|
||
|
|
reg = <0xc00 0x100>;
|
||
|
|
interrupts = <74 0x8>;
|
||
|
|
interrupt-parent = <&ipic>;
|
||
|
|
gpio-controller;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio2: gpio-controller@d00 {
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
|
||
|
|
reg = <0xd00 0x100>;
|
||
|
|
interrupts = <75 0x8>;
|
||
|
|
interrupt-parent = <&ipic>;
|
||
|
|
gpio-controller;
|
||
|
|
};
|
||
|
|
|
||
|
|
See booting-without-of.txt for details of how to specify GPIO
|
||
|
|
information for devices.
|
||
|
|
|
||
|
|
To use GPIO pins as interrupt sources for peripherals, specify the
|
||
|
|
GPIO controller as the interrupt parent and define GPIO number +
|
||
|
|
trigger mode using the interrupts property, which is defined like
|
||
|
|
this:
|
||
|
|
|
||
|
|
interrupts = <number trigger>, where:
|
||
|
|
- number: GPIO pin (0..31)
|
||
|
|
- trigger: trigger mode:
|
||
|
|
2 = trigger on falling edge
|
||
|
|
3 = trigger on both edges
|
||
|
|
|
||
|
|
Example of device using this is:
|
||
|
|
|
||
|
|
funkyfpga@0 {
|
||
|
|
compatible = "funky-fpga";
|
||
|
|
...
|
||
|
|
interrupts = <4 3>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
};
|