319 lines
8.9 KiB
C
319 lines
8.9 KiB
C
|
/*
|
||
|
|
* Copyright (C) 2014 Broadcom Corporation
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation version 2.
|
||
|
|
*
|
||
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||
|
|
* kind, whether express or implied; without even the implied warranty
|
||
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/clk.h>
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include <linux/err.h>
|
||
|
|
#include <linux/io.h>
|
||
|
|
#include <linux/ioport.h>
|
||
|
|
#include <linux/math64.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/of.h>
|
||
|
|
#include <linux/platform_device.h>
|
||
|
|
#include <linux/pwm.h>
|
||
|
|
#include <linux/slab.h>
|
||
|
|
#include <linux/types.h>
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The Kona PWM has some unusual characteristics. Here are the main points.
|
||
|
|
*
|
||
|
|
* 1) There is no disable bit and the hardware docs advise programming a zero
|
||
|
|
* duty to achieve output equivalent to that of a normal disable operation.
|
||
|
|
*
|
||
|
|
* 2) Changes to prescale, duty, period, and polarity do not take effect until
|
||
|
|
* a subsequent rising edge of the trigger bit.
|
||
|
|
*
|
||
|
|
* 3) If the smooth bit and trigger bit are both low, the output is a constant
|
||
|
|
* high signal. Otherwise, the earlier waveform continues to be output.
|
||
|
|
*
|
||
|
|
* 4) If the smooth bit is set on the rising edge of the trigger bit, output
|
||
|
|
* will transition to the new settings on a period boundary (which could be
|
||
|
|
* seconds away). If the smooth bit is clear, new settings will be applied
|
||
|
|
* as soon as possible (the hardware always has a 400ns delay).
|
||
|
|
*
|
||
|
|
* 5) When the external clock that feeds the PWM is disabled, output is pegged
|
||
|
|
* high or low depending on its state at that exact instant.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define PWM_CONTROL_OFFSET (0x00000000)
|
||
|
|
#define PWM_CONTROL_SMOOTH_SHIFT(chan) (24 + (chan))
|
||
|
|
#define PWM_CONTROL_TYPE_SHIFT(chan) (16 + (chan))
|
||
|
|
#define PWM_CONTROL_POLARITY_SHIFT(chan) (8 + (chan))
|
||
|
|
#define PWM_CONTROL_TRIGGER_SHIFT(chan) (chan)
|
||
|
|
|
||
|
|
#define PRESCALE_OFFSET (0x00000004)
|
||
|
|
#define PRESCALE_SHIFT(chan) ((chan) << 2)
|
||
|
|
#define PRESCALE_MASK(chan) (0x7 << PRESCALE_SHIFT(chan))
|
||
|
|
#define PRESCALE_MIN (0x00000000)
|
||
|
|
#define PRESCALE_MAX (0x00000007)
|
||
|
|
|
||
|
|
#define PERIOD_COUNT_OFFSET(chan) (0x00000008 + ((chan) << 3))
|
||
|
|
#define PERIOD_COUNT_MIN (0x00000002)
|
||
|
|
#define PERIOD_COUNT_MAX (0x00ffffff)
|
||
|
|
|
||
|
|
#define DUTY_CYCLE_HIGH_OFFSET(chan) (0x0000000c + ((chan) << 3))
|
||
|
|
#define DUTY_CYCLE_HIGH_MIN (0x00000000)
|
||
|
|
#define DUTY_CYCLE_HIGH_MAX (0x00ffffff)
|
||
|
|
|
||
|
|
struct kona_pwmc {
|
||
|
|
struct pwm_chip chip;
|
||
|
|
void __iomem *base;
|
||
|
|
struct clk *clk;
|
||
|
|
};
|
||
|
|
|
||
|
|
static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
|
||
|
|
{
|
||
|
|
return container_of(_chip, struct kona_pwmc, chip);
|
||
|
|
}
|
||
|
|
|
||
|
|
static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
|
||
|
|
{
|
||
|
|
unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
|
||
|
|
|
||
|
|
/* Clear trigger bit but set smooth bit to maintain old output */
|
||
|
|
value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan);
|
||
|
|
value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
|
||
|
|
writel(value, kp->base + PWM_CONTROL_OFFSET);
|
||
|
|
|
||
|
|
/* Set trigger bit and clear smooth bit to apply new settings */
|
||
|
|
value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
|
||
|
|
value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
|
||
|
|
writel(value, kp->base + PWM_CONTROL_OFFSET);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||
|
|
int duty_ns, int period_ns)
|
||
|
|
{
|
||
|
|
struct kona_pwmc *kp = to_kona_pwmc(chip);
|
||
|
|
u64 val, div, rate;
|
||
|
|
unsigned long prescale = PRESCALE_MIN, pc, dc;
|
||
|
|
unsigned int value, chan = pwm->hwpwm;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Find period count, duty count and prescale to suit duty_ns and
|
||
|
|
* period_ns. This is done according to formulas described below:
|
||
|
|
*
|
||
|
|
* period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
|
||
|
|
* duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
|
||
|
|
*
|
||
|
|
* PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
|
||
|
|
* DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
|
||
|
|
*/
|
||
|
|
|
||
|
|
rate = clk_get_rate(kp->clk);
|
||
|
|
|
||
|
|
while (1) {
|
||
|
|
div = 1000000000;
|
||
|
|
div *= 1 + prescale;
|
||
|
|
val = rate * period_ns;
|
||
|
|
pc = div64_u64(val, div);
|
||
|
|
val = rate * duty_ns;
|
||
|
|
dc = div64_u64(val, div);
|
||
|
|
|
||
|
|
/* If duty_ns or period_ns are not achievable then return */
|
||
|
|
if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
/* If pc and dc are in bounds, the calculation is done */
|
||
|
|
if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX)
|
||
|
|
break;
|
||
|
|
|
||
|
|
/* Otherwise, increase prescale and recalculate pc and dc */
|
||
|
|
if (++prescale > PRESCALE_MAX)
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* If the PWM channel is enabled, write the settings to the HW */
|
||
|
|
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
|
||
|
|
value = readl(kp->base + PRESCALE_OFFSET);
|
||
|
|
value &= ~PRESCALE_MASK(chan);
|
||
|
|
value |= prescale << PRESCALE_SHIFT(chan);
|
||
|
|
writel(value, kp->base + PRESCALE_OFFSET);
|
||
|
|
|
||
|
|
writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));
|
||
|
|
|
||
|
|
writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
|
||
|
|
|
||
|
|
kona_pwmc_apply_settings(kp, chan);
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
|
||
|
|
enum pwm_polarity polarity)
|
||
|
|
{
|
||
|
|
struct kona_pwmc *kp = to_kona_pwmc(chip);
|
||
|
|
unsigned int chan = pwm->hwpwm;
|
||
|
|
unsigned int value;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
ret = clk_prepare_enable(kp->clk);
|
||
|
|
if (ret < 0) {
|
||
|
|
dev_err(chip->dev, "failed to enable clock: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
value = readl(kp->base + PWM_CONTROL_OFFSET);
|
||
|
|
|
||
|
|
if (polarity == PWM_POLARITY_NORMAL)
|
||
|
|
value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan);
|
||
|
|
else
|
||
|
|
value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan));
|
||
|
|
|
||
|
|
writel(value, kp->base + PWM_CONTROL_OFFSET);
|
||
|
|
|
||
|
|
kona_pwmc_apply_settings(kp, chan);
|
||
|
|
|
||
|
|
/* Wait for waveform to settle before gating off the clock */
|
||
|
|
ndelay(400);
|
||
|
|
|
||
|
|
clk_disable_unprepare(kp->clk);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||
|
|
{
|
||
|
|
struct kona_pwmc *kp = to_kona_pwmc(chip);
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
ret = clk_prepare_enable(kp->clk);
|
||
|
|
if (ret < 0) {
|
||
|
|
dev_err(chip->dev, "failed to enable clock: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period);
|
||
|
|
if (ret < 0) {
|
||
|
|
clk_disable_unprepare(kp->clk);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||
|
|
{
|
||
|
|
struct kona_pwmc *kp = to_kona_pwmc(chip);
|
||
|
|
unsigned int chan = pwm->hwpwm;
|
||
|
|
|
||
|
|
/* Simulate a disable by configuring for zero duty */
|
||
|
|
writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
|
||
|
|
kona_pwmc_apply_settings(kp, chan);
|
||
|
|
|
||
|
|
/* Wait for waveform to settle before gating off the clock */
|
||
|
|
ndelay(400);
|
||
|
|
|
||
|
|
clk_disable_unprepare(kp->clk);
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct pwm_ops kona_pwm_ops = {
|
||
|
|
.config = kona_pwmc_config,
|
||
|
|
.set_polarity = kona_pwmc_set_polarity,
|
||
|
|
.enable = kona_pwmc_enable,
|
||
|
|
.disable = kona_pwmc_disable,
|
||
|
|
.owner = THIS_MODULE,
|
||
|
|
};
|
||
|
|
|
||
|
|
static int kona_pwmc_probe(struct platform_device *pdev)
|
||
|
|
{
|
||
|
|
struct kona_pwmc *kp;
|
||
|
|
struct resource *res;
|
||
|
|
unsigned int chan;
|
||
|
|
unsigned int value = 0;
|
||
|
|
int ret = 0;
|
||
|
|
|
||
|
|
kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
|
||
|
|
if (kp == NULL)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
platform_set_drvdata(pdev, kp);
|
||
|
|
|
||
|
|
kp->chip.dev = &pdev->dev;
|
||
|
|
kp->chip.ops = &kona_pwm_ops;
|
||
|
|
kp->chip.base = -1;
|
||
|
|
kp->chip.npwm = 6;
|
||
|
|
kp->chip.of_xlate = of_pwm_xlate_with_flags;
|
||
|
|
kp->chip.of_pwm_n_cells = 3;
|
||
|
|
kp->chip.can_sleep = true;
|
||
|
|
|
||
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
|
kp->base = devm_ioremap_resource(&pdev->dev, res);
|
||
|
|
if (IS_ERR(kp->base))
|
||
|
|
return PTR_ERR(kp->base);
|
||
|
|
|
||
|
|
kp->clk = devm_clk_get(&pdev->dev, NULL);
|
||
|
|
if (IS_ERR(kp->clk)) {
|
||
|
|
dev_err(&pdev->dev, "failed to get clock: %ld\n",
|
||
|
|
PTR_ERR(kp->clk));
|
||
|
|
return PTR_ERR(kp->clk);
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = clk_prepare_enable(kp->clk);
|
||
|
|
if (ret < 0) {
|
||
|
|
dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Set smooth mode, push/pull, and normal polarity for all channels */
|
||
|
|
for (chan = 0; chan < kp->chip.npwm; chan++) {
|
||
|
|
value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
|
||
|
|
value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
|
||
|
|
value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan));
|
||
|
|
}
|
||
|
|
|
||
|
|
writel(value, kp->base + PWM_CONTROL_OFFSET);
|
||
|
|
|
||
|
|
clk_disable_unprepare(kp->clk);
|
||
|
|
|
||
|
|
ret = pwmchip_add(&kp->chip);
|
||
|
|
if (ret < 0)
|
||
|
|
dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int kona_pwmc_remove(struct platform_device *pdev)
|
||
|
|
{
|
||
|
|
struct kona_pwmc *kp = platform_get_drvdata(pdev);
|
||
|
|
unsigned int chan;
|
||
|
|
|
||
|
|
for (chan = 0; chan < kp->chip.npwm; chan++)
|
||
|
|
if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
|
||
|
|
clk_disable_unprepare(kp->clk);
|
||
|
|
|
||
|
|
return pwmchip_remove(&kp->chip);
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct of_device_id bcm_kona_pwmc_dt[] = {
|
||
|
|
{ .compatible = "brcm,kona-pwm" },
|
||
|
|
{ },
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
|
||
|
|
|
||
|
|
static struct platform_driver kona_pwmc_driver = {
|
||
|
|
.driver = {
|
||
|
|
.name = "bcm-kona-pwm",
|
||
|
|
.of_match_table = bcm_kona_pwmc_dt,
|
||
|
|
},
|
||
|
|
.probe = kona_pwmc_probe,
|
||
|
|
.remove = kona_pwmc_remove,
|
||
|
|
};
|
||
|
|
module_platform_driver(kona_pwmc_driver);
|
||
|
|
|
||
|
|
MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
|
||
|
|
MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
|
||
|
|
MODULE_DESCRIPTION("Broadcom Kona PWM driver");
|
||
|
|
MODULE_LICENSE("GPL v2");
|