452 lines
11 KiB
Plaintext
452 lines
11 KiB
Plaintext
|
/*
|
||
|
|
* Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
|
||
|
|
*
|
||
|
|
* Based on omap3-beagle-xm.dts
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
|
* published by the Free Software Foundation.
|
||
|
|
*/
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include "omap36xx.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "OMAP3 GTA04";
|
||
|
|
compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
|
||
|
|
|
||
|
|
cpus {
|
||
|
|
cpu@0 {
|
||
|
|
cpu0-supply = <&vcc>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||
|
|
};
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
display0 = &lcd;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
|
||
|
|
aux-button {
|
||
|
|
label = "aux";
|
||
|
|
linux,code = <169>;
|
||
|
|
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||
|
|
gpio-key,wakeup;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sound {
|
||
|
|
compatible = "ti,omap-twl4030";
|
||
|
|
ti,model = "gta04";
|
||
|
|
|
||
|
|
ti,mcbsp = <&mcbsp2>;
|
||
|
|
ti,codec = <&twl_audio>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi_lcd {
|
||
|
|
compatible = "spi-gpio";
|
||
|
|
#address-cells = <0x1>;
|
||
|
|
#size-cells = <0x0>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&spi_gpio_pins>;
|
||
|
|
|
||
|
|
gpio-sck = <&gpio1 12 0>;
|
||
|
|
gpio-miso = <&gpio1 18 0>;
|
||
|
|
gpio-mosi = <&gpio1 20 0>;
|
||
|
|
cs-gpios = <&gpio1 19 0>;
|
||
|
|
num-chipselects = <1>;
|
||
|
|
|
||
|
|
/* lcd panel */
|
||
|
|
lcd: td028ttec1@0 {
|
||
|
|
compatible = "toppoly,td028ttec1";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <100000>;
|
||
|
|
spi-cpol;
|
||
|
|
spi-cpha;
|
||
|
|
|
||
|
|
label = "lcd";
|
||
|
|
port {
|
||
|
|
lcd_in: endpoint {
|
||
|
|
remote-endpoint = <&dpi_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
hsusb2_phy: hsusb2_phy {
|
||
|
|
compatible = "usb-nop-xceiv";
|
||
|
|
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&omap3_pmx_core {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <
|
||
|
|
&hsusb2_pins
|
||
|
|
>;
|
||
|
|
|
||
|
|
hsusb2_pins: pinmux_hsusb2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
|
||
|
|
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart1_pins: pinmux_uart1_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
|
||
|
|
0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart2_pins: pinmux_uart2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
|
||
|
|
0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart3_pins: pinmux_uart3_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
|
||
|
|
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc1_pins: pinmux_mmc1_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
|
||
|
|
0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
|
||
|
|
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
|
||
|
|
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
||
|
|
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
||
|
|
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||
|
|
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||
|
|
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||
|
|
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||
|
|
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||
|
|
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||
|
|
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||
|
|
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||
|
|
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||
|
|
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||
|
|
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||
|
|
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||
|
|
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||
|
|
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||
|
|
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||
|
|
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||
|
|
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||
|
|
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||
|
|
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||
|
|
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||
|
|
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||
|
|
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||
|
|
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||
|
|
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||
|
|
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||
|
|
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||
|
|
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||
|
|
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&omap3_pmx_core2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <
|
||
|
|
&hsusb2_2_pins
|
||
|
|
>;
|
||
|
|
|
||
|
|
hsusb2_2_pins: pinmux_hsusb2_2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi_gpio_pins: spi_gpio_pinmux {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
|
||
|
|
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <2600000>;
|
||
|
|
|
||
|
|
twl: twl@48 {
|
||
|
|
reg = <0x48>;
|
||
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||
|
|
interrupt-parent = <&intc>;
|
||
|
|
};
|
||
|
|
|
||
|
|
twl_audio: audio {
|
||
|
|
compatible = "ti,twl4030-audio";
|
||
|
|
codec {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "twl4030.dtsi"
|
||
|
|
#include "twl4030_omap3.dtsi"
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
/* pressure sensor */
|
||
|
|
bmp085@77 {
|
||
|
|
compatible = "bosch,bmp085";
|
||
|
|
reg = <0x77>;
|
||
|
|
interrupt-parent = <&gpio4>;
|
||
|
|
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* accelerometer */
|
||
|
|
bma180@41 {
|
||
|
|
compatible = "bosch,bma180";
|
||
|
|
reg = <0x41>;
|
||
|
|
interrupt-parent = <&gpio3>;
|
||
|
|
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* leds */
|
||
|
|
tca6507@45 {
|
||
|
|
compatible = "ti,tca6507";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x45>;
|
||
|
|
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
|
||
|
|
gta04_led0: red_aux@0 {
|
||
|
|
label = "gta04:red:aux";
|
||
|
|
reg = <0x0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gta04_led1: green_aux@1 {
|
||
|
|
label = "gta04:green:aux";
|
||
|
|
reg = <0x1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gta04_led3: red_power@3 {
|
||
|
|
label = "gta04:red:power";
|
||
|
|
reg = <0x3>;
|
||
|
|
linux,default-trigger = "default-on";
|
||
|
|
};
|
||
|
|
|
||
|
|
gta04_led4: green_power@4 {
|
||
|
|
label = "gta04:green:power";
|
||
|
|
reg = <0x4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wifi_reset: wifi_reset@6 {
|
||
|
|
reg = <0x6>;
|
||
|
|
compatible = "gpio";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* compass aka magnetometer */
|
||
|
|
hmc5843@1e {
|
||
|
|
compatible = "honeywell,hmc5883l";
|
||
|
|
reg = <0x1e>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* touchscreen */
|
||
|
|
tsc2007@48 {
|
||
|
|
compatible = "ti,tsc2007";
|
||
|
|
reg = <0x48>;
|
||
|
|
interrupt-parent = <&gpio6>;
|
||
|
|
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
|
||
|
|
ti,x-plate-ohms = <600>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_otg_hs {
|
||
|
|
interface-type = <0>;
|
||
|
|
usb-phy = <&usb2_phy>;
|
||
|
|
phys = <&usb2_phy>;
|
||
|
|
phy-names = "usb2-phy";
|
||
|
|
mode = <3>;
|
||
|
|
power = <50>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbhshost {
|
||
|
|
port2-mode = "ehci-phy";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbhsehci {
|
||
|
|
phys = <0 &hsusb2_phy>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmc1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&mmc1_pins>;
|
||
|
|
vmmc-supply = <&vmmc1>;
|
||
|
|
bus-width = <4>;
|
||
|
|
ti,non-removable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmc2 {
|
||
|
|
vmmc-supply = <&vaux4>;
|
||
|
|
bus-width = <4>;
|
||
|
|
ti,non-removable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmc3 {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart1_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart2_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart3_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&charger {
|
||
|
|
bb_uvolt = <3200000>;
|
||
|
|
bb_uamp = <150>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* spare */
|
||
|
|
&vaux1 {
|
||
|
|
regulator-min-microvolt = <2500000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* sensors */
|
||
|
|
&vaux2 {
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <2800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* camera */
|
||
|
|
&vaux3 {
|
||
|
|
regulator-min-microvolt = <2500000>;
|
||
|
|
regulator-max-microvolt = <2500000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* WLAN/BT */
|
||
|
|
&vaux4 {
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <3150000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* GPS LNA */
|
||
|
|
&vsim {
|
||
|
|
regulator-min-microvolt = <2800000>;
|
||
|
|
regulator-max-microvolt = <3150000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Needed to power the DPI pins */
|
||
|
|
&vpll2 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dss {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = < &dss_dpi_pins >;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
port {
|
||
|
|
dpi_out: endpoint {
|
||
|
|
remote-endpoint = <&lcd_in>;
|
||
|
|
data-lines = <24>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpmc {
|
||
|
|
ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
|
||
|
|
|
||
|
|
nand@0,0 {
|
||
|
|
reg = <0 0 0>; /* CS0, offset 0 */
|
||
|
|
nand-bus-width = <16>;
|
||
|
|
ti,nand-ecc-opt = "bch8";
|
||
|
|
|
||
|
|
gpmc,sync-clk-ps = <0>;
|
||
|
|
gpmc,cs-on-ns = <0>;
|
||
|
|
gpmc,cs-rd-off-ns = <44>;
|
||
|
|
gpmc,cs-wr-off-ns = <44>;
|
||
|
|
gpmc,adv-on-ns = <6>;
|
||
|
|
gpmc,adv-rd-off-ns = <34>;
|
||
|
|
gpmc,adv-wr-off-ns = <44>;
|
||
|
|
gpmc,we-off-ns = <40>;
|
||
|
|
gpmc,oe-off-ns = <54>;
|
||
|
|
gpmc,access-ns = <64>;
|
||
|
|
gpmc,rd-cycle-ns = <82>;
|
||
|
|
gpmc,wr-cycle-ns = <82>;
|
||
|
|
gpmc,wr-access-ns = <40>;
|
||
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
||
|
|
gpmc,device-width = <2>;
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
|
||
|
|
x-loader@0 {
|
||
|
|
label = "X-Loader";
|
||
|
|
reg = <0 0x80000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
bootloaders@80000 {
|
||
|
|
label = "U-Boot";
|
||
|
|
reg = <0x80000 0x1e0000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
bootloaders_env@260000 {
|
||
|
|
label = "U-Boot Env";
|
||
|
|
reg = <0x260000 0x20000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
kernel@280000 {
|
||
|
|
label = "Kernel";
|
||
|
|
reg = <0x280000 0x400000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
filesystem@680000 {
|
||
|
|
label = "File System";
|
||
|
|
reg = <0x680000 0xf980000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|