First version.

README.md

@@ -1,2 +1,14 @@
-# Heizberry
+# Heizberry Pi
-Service to control the Equiva thermostats in the foobar. 
+Service to control the Equiva thermostats in the foobar. Can be installed on Raspberry Pi. Requires Bluetooth 4.0/LE module.
+
+## Installation
+1. Install Raspberry Pi with Raspian.
+2. Find MAC-addresses of thermostats
+  - sudo addgroup pi bluetooth
+  - run bluetoothctl
+2. Connect bluetooth USB dongle.
+Controller will be found.
+3. Type command scan on
+Bluetooth devices are searched.
+[NEW] Device 00:1A:22:0D:BE:EE CC-RT-BLE
+

beamerctl.py

@@ -0,0 +1,169 @@
+#!/usr/bin/env python3
+
+import argparse
+import re
+import serial
+import time
+import signal
+import logging
+import sys
+import schedule
+import paho.mqtt.client as mqtt
+from beamer import acer as beamercodes
+code = beamercodes.clubbeamer()
+
+def on_connect(client, userdata, flags, rc):
+    global beamer_state
+    global input_source
+
+    log.debug("Connected with result code " + str(rc))
+
+    beamer_state = readBeamerState()
+    client.publish("foobar/oben/cantina/beamer/status", beamer_state, qos=1, retain=True)
+
+    input_source = readInputSource()
+    client.publish("foobar/oben/cantina/beamer/source", input_source, qos=1, retain=True)
+
+    client.subscribe("foobar/oben/cantina/beamer/action")
+
+
+def on_publish(client, userdata, mid):
+    log.debug("mid: "+str(mid))
+
+
+def on_message(client, userdata, message):
+    msg = message.payload.decode("utf-8")
+    log.debug('received message: {}'.format(msg))
+    if (msg == "on"):
+        ser.write(code.set['on'])
+
+    if (msg == "off"):
+        ser.write(code.set['off'])
+
+    if (msg == "vga"):
+        ser.write(code.set['vga'])
+
+    if (msg == "hdmi1"):
+        ser.write(code.set['hdmi1'][0])
+        time.sleep(1)
+        ser.write(code.set['hdmi1'][1])
+
+    if (msg == "hdmi2"):
+        ser.write(code.set['hdmi2'][0])
+        time.sleep(0.5)
+        ser.write(code.set['hdmi2'][1])
+        time.sleep(0.5)
+        ser.write(code.set['hdmi2'][2])
+
+
+def readBeamerState():
+    ser.write(b"* 0 Lamp ?\r")
+    read_val = ser.read(size=64)
+    if(re.match(b'.*Lamp.1.*', read_val)):
+        status = "on"
+    else:
+        status = "off"
+    return status
+
+
+def beamerStatusChanged():
+    global beamer_state
+    if (beamer_state != readBeamerState()):
+        log.debug('Beamer state has changed')
+        beamer_state = readBeamerState()
+        return True
+    else:
+        return False
+
+
+def readInputSource():
+    ser.write(b"* 0 Src ?\r")
+    read_val = ser.read(size=64)
+    if(re.match(b'.*Src.0.*', read_val)):
+        return "no_input"
+    elif (re.match(b'.*Src.1.*', read_val)):
+        return "vga"
+    elif (re.match(b'.*Src.8.*', read_val)):
+        return "hdmi"
+    elif (readBeamerState()):
+        return "off"
+
+def inputSourceChanged():
+    global input_source
+    if (input_source != readInputSource()):
+        log.debug('Input source has changed to {}'.format(readInputSource() ))
+        input_source = readInputSource()
+        return True
+    else:
+        return False
+
+def terminate(signum, frame):
+    log.warn('SIGTERM received. Shutting down!')
+    log.info('Closing serial connection')
+    ser.close()
+    log.info('stopping mqtt client')
+    client.loop_stop()
+    log.info('disconnecting mqtt client')
+    client.disconnect()
+    log.info('beamerctl stopped all functions; exit')
+    sys.exit(0)
+
+
+def getArgs():
+    parser = argparse.ArgumentParser()
+    parser.add_argument("-v", "--verbose", action="store_true",
+                        help="increase output verbosity")
+    return parser.parse_args()
+
+def periodicUpdate():
+    log.debug('run scheduled statusupdates')
+    client.publish("foobar/oben/cantina/beamer/status", readBeamerState(), qos=1, retain=True)
+    client.publish("foobar/oben/cantina/beamer/source", readInputSource(), qos=1, retain=True)
+
+
+if __name__ == '__main__':
+    beamer_state = False
+    input_source = False
+
+    signal.signal(signal.SIGINT, terminate)
+    args = getArgs()
+    logging.basicConfig(
+        level=logging.DEBUG, format='%(asctime)s %(name)-12s %(levelname)-8s %(message)s')
+    log = logging.getLogger('beamerctl')
+    if args.verbose:
+        log.setLevel(logging.DEBUG)
+        log.info('Loglevel set to DEBUG')
+    else:
+        log.setLevel(logging.WARN)
+    
+    serialport = '/dev/ttyUSB0'
+
+    try:
+        ser = serial.Serial(port=serialport, baudrate=9600, timeout=1)
+    except serial.serialutil.SerialException as e:
+        log.critical(e)
+        sys.exit(1)
+    
+    client = mqtt.Client()
+    client.on_connect = on_connect
+    client.on_message = on_message
+    client.connect("10.42.0.244", 1883, 60)
+
+    client.loop_start()
+
+    log.debug('schedule periodic statusupdates')
+    schedule.every(1).minutes.do(periodicUpdate)
+
+    time.sleep(5)
+
+    while True:
+        schedule.run_pending()
+
+        if (inputSourceChanged()):
+            client.publish("foobar/oben/cantina/beamer/source",
+                           input_source, qos=1,  retain=True) 
+
+        if (beamerStatusChanged()):
+            client.publish("foobar/oben/cantina/beamer/status",
+                           beamer_state, qos=1,  retain=True)
+        time.sleep(1)

beamerctl.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=heizberry
+After=network-online.target
+
+[Service]
+Type=Simple
+ExecStart=/srv/herizberry/heizberry.py
+
+Restart=always
+RestartSec=3
+
+[Install]
+WantedBy=multi-user.target

heizberry.py

@@ -0,0 +1,99 @@
+#!/usr/bin/env python3
+
+import argparse
+import re
+import time
+import signal
+import logging
+import sys
+import schedule
+import paho.mqtt.client as mqtt
+from eq3bt import Thermostat
+
+thermostatBallpit = Thermostat('00:1A:22:0D:BE:EE')
+
+global temperature_off = 12
+global temperature_on = 19
+
+
+def on_connect(client, userdata, flags, rc):
+    log.debug("Connected with result code " + str(rc))
+
+    sendReadings()
+
+
+def on_publish(client, userdata, mid):
+    log.debug("mid: "+str(mid))
+
+
+def on_message(client, userdata, message):
+    msg = message.payload.decode("utf-8")
+    log.debug('received message: %s from %s', format(msg), format(message.topic))
+
+    if (message.topic == "foobar/oben/baellebad/heizung/action")
+        if (msg == "on"):
+            thermostatBallpit.target_temperature=temperature_on
+        else
+            if (msg == "on"):
+                thermostatBallpit.target_temperature=temperature_on
+            else
+                thermostatBallpit.target_temperature=msg
+
+
+
+def sendReadings():
+    log.debug('read target temperature from thermostats')
+
+    # Bällebad
+    # Update readings
+    thermostatBallpit.update()
+
+    # Send target temperatures
+    temp=thermostatBallpit.target_temperature
+    if(temp == temperature_on)
+        temp = temp + " on"
+
+    if(temp == temperature_off)
+        temp = temp + " off"
+
+    client.publish("foobar/oben/baellebad/status", temp, qos=1, retain=True)
+
+
+def terminate(signum, frame):
+    log.warn('SIGTERM received. Shutting down!')
+    log.info('stopping mqtt client')
+    client.loop_stop()
+    log.info('disconnecting mqtt client')
+    client.disconnect()
+    log.info('heizberry stopped all functions; exit')
+    sys.exit(0)
+
+
+def getArgs():
+    parser = argparse.ArgumentParser()
+    parser.add_argument("-v", "--verbose", action="store_true",
+                        help="increase output verbosity")
+    return parser.parse_args()
+
+
+if __name__ == '__main__':
+    signal.signal(signal.SIGINT, terminate)
+    args = getArgs()
+    logging.basicConfig(
+        level=logging.DEBUG, format='%(asctime)s %(name)-12s %(levelname)-8s %(message)s')
+    log = logging.getLogger('heizberry')
+    if args.verbose:
+        log.setLevel(logging.DEBUG)
+        log.info('Loglevel set to DEBUG')
+    else:
+        log.setLevel(logging.WARN)
+
+    client = mqtt.Client("Heizberry_oben")
+    client.on_connect = on_connect
+    client.on_message = on_message
+    client.connect("10.42.0.244", 1883, 60)
+
+    client.loop_start()
+
+    log.debug('schedule periodic readings')
+    schedule.every(1).minutes.do(sendReadings)

heizberry.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=heizberry
+After=network-online.target
+
+[Service]
+Type=Simple
+ExecStart=/srv/herizberry/heizberry.py
+
+Restart=always
+RestartSec=3
+
+[Install]
+WantedBy=multi-user.target

requirements.txt

@@ -0,0 +1,3 @@
+paho_mqtt==1.3.0
+schedule==0.4.3
+python-eq3bt==0.1.10